FAP500
Microprocessor control unit with 1 loop line
>> Configuration: 1 loop line (class A) or 2 open lines (class B)
>> Possibility of managing up to 128 points per loop
>> Point teach-in and point logic address
>> 4 x 40 digits backlit display
>> Event log: 1,000 events
>> Event history shown on display
>> 10 passwords programmable on 3 levels
>> 480 programmable zones
>> USB port for connection to local PC for programming via SW
>> Possibility of monitoring detector signal/noise ratio level
>> Built-in real time clock with buffer battery
>> Non-volatile memory
>> Alarm data saved on devices
>> Monitoring of the first 10 devices entering alarm status with digital time-trend visualisation
>> Control unit outputs: 4 [siren relay, alarm relay, malfunction relay, programmable relay (power
failure/exclusion)]
>> Internal buzzer
>> Exclusion of individual point /zone
>> Power supply: 230 Vac
>> Maximum output current: 1.5 A@24 Vdc
>> Battery charge limit and battery status check
>> Battery housing: 2x 12 A @ 12 Vdc batteries
>> Possibility of implementing at least 2 Km loop with 2 x 1.5 mm2 screened cable
>> Noise immunity up to 30 Vm
>> Communication protocol shared by all system control units
>> Dimensions (W x H x D): 490 x 350 x 145 mm
>> Certified EN54 part 2 class and part 4, No. 0051-CPD-0240
